Energy Made Easy
Home heating · First-hand account

My Air Source Heat Pump Installation: Costs, Grant and Running It

What it was like to swap an oil boiler for an air source heat pump: the quotes, the grant, what was fitted, what went wrong and how it has run since.

By Last Updated:

Disclosure: I paid full price for this installation. How this site makes money.

I run this site, and I had an air source heat pump fitted at home in October 2025, replacing a system that ran on heating oil. This page sets out what was installed, what it cost and how it went, including the parts that did not go well. The prices and dates come from my emails with the installer and with Ofgem. It is one house and one installer, so treat it as an example, not a benchmark. I will add full-year running figures in early 2027.

The house and the old heating system

Property
Detached house, built in the 1980s or 1990s
Bedrooms
5
Floor area
399 m²
Old fuel
Heating oil
Old boiler
Cast-iron oil boiler

When the heat pump went in, the house already had loft insulation, cavity wall insulation and double glazing.

Why a heat pump, and getting quotes

In early July 2025 I had two written quotes, one from Glow Green and one from BOXT. Both were for the same kit: a Vaillant aroTHERM plus 12 kW and a 300 litre hot water cylinder.

BOXT's first like-for-like figure, as I wrote it down at the time, was £13,349, or £5,849 after the grant. Glow Green's first figure, with no radiators included, was £13,756.65.

I chose Glow Green after comparing the price and the reviews. As the next section shows, the price I ended up paying was not the first one I was given.

The survey

Survey
Late July 2025
Heat loss
12.08 kW

The surveyor came in late July 2025, after a no-show on the first booked date. The survey is what moved the heat pump from 10 kW to 12 kW. Glow Green's room-by-room heat loss calculation is dated 14 August 2025. It put the heat loss of the whole house at 12.08 kW, which works out at about 30 W for each square metre of floor, and estimated that the house needs about 26,800 kWh of heat a year. It assumed 21°C in the living rooms, 18°C in the bedrooms and 22°C in the bathrooms.

The quote: price, grant and what was included

Installer
Glow Green
Final price before the grant
£13,450
Boiler Upgrade Scheme grant
− £7,500
What I paid for the install
£5,950
Survey and design fee, paid earlier
£200

The price moved before I signed. I had first accepted £5,700 after the grant, which was for a 10 kW heat pump with no radiators. After the survey the unit had to be 12 kW, and the price became £5,950. I signed that quote on 21 August 2025.

I paid Glow Green myself, with no finance: a 25% deposit, then a final payment of £2,587.50. The £200 survey and design fee was paid earlier and is on top of the install price, so the heat pump cost me £6,150 in all, before the radiator work.

The extra £1,500 for homes heated by oil or LPG did not exist yet, so my grant was the standard £7,500. Ofgem issued the voucher on 24 September 2025 and confirmed it had been redeemed on 29 October 2025.

The price included:

  • A Vaillant aroTHERM plus 12 kW air source heat pump
  • A 300 litre hot water cylinder
  • Removing the old oil boiler

It did not include:

  • The radiator work. Glow Green quoted £560 per radiator fitted, for 10 radiators and 2 towel rails. I got someone else to do them, which saved a lot compared with £560 each. That work is not in the figures above.

If you are weighing up quotes of your own, the quote comparison tool puts two side by side and lists what to ask about.

The installation

Vaillant aroTHERM plus air source heat pump standing on black anti-vibration feet against a brick wall, with insulated pipes beside it and a Tesla wall-mounted unit in the background.
The Vaillant aroTHERM plus outdoor unit, on anti-vibration feet, with insulated pipework running along the wall.

The install was booked to start on Monday 6 October 2025. It did not start smoothly and it did not finish quickly. These are the dates from my emails.

  1. 6 OctoberThe booked start date.
  2. 7 OctoberI had to chase. There were last-minute staffing issues.
  3. 15 OctoberThe cylinder and the new pipework to the underfloor heating manifold were in. The two indoor photos further down were taken that day.
  4. 21 OctoberThe job was still unfinished. The thermostats were the wrong ones, finishing work was outstanding, waste was still on site and the old boiler had not been removed. I raised a formal complaint.
  5. 24 OctoberThe day planned for commissioning.
  6. 25 OctoberThe date on the MCS certificate.
  7. Around the end of OctoberThe first attempt to take out the old boiler failed.
  8. 7 NovemberThe rubbish was collected.
  9. Mid-NovemberThe old boiler was finally taken out. Until then it had sat in the house, with a smell of oil after it had been partly disconnected.

What changed indoors

Heat pump
Vaillant aroTHERM plus
Output
12 kW
Hot water cylinder
300 litres (Telford Tempest, indirect)
Buffer tank
None. There is no separate buffer tank.
Heating
Underfloor heating on one side of the ground floor, radiators upstairs
Heating zones
Three
Controls
Vaillant sensoCOMFORT
Design flow temperature
40°C

The cylinder went into the existing cupboard. Glow Green specified a tank-on-tank design so that it would fit.

The system was designed to run at a flow temperature of 40°C.

Tall white unvented hot water cylinder fitted in a cupboard, surrounded by new copper pipework, a circulating pump, a magnetic filter and a wall-mounted time clock.
The 300 litre hot water cylinder in the cupboard, with the new copper pipework, a circulating pump and a magnetic filter.
Heating cupboard with new copper pipework, two circulating pumps and a manifold with coloured valve tags, framed by timber studs.
New copper pipework and circulating pumps serving the underfloor-heating manifold.

Both photos were taken during the install.

Wondering whether a smart thermostat would work with a heat pump? Does tado work with a heat pump? covers what to check first.

Running it so far

In early November 2025 I was running a heat curve of 0.35 and then 0.3, and the house was holding at around 21 to 22°C.

Tariff
Intelligent Octopus Go
Electricity used
5,048 kWh (4,481 kWh for heating, 567 kWh for hot water)
Heat delivered
20,307 kWh (18,649 kWh of heating, 1,658 kWh of hot water)
Efficiency (heat out ÷ electricity in)
4.02

These figures are for 1 January to 17 November 2026 and come from the heat pump's own app, which uses the unit's built-in metering, not a separate heat meter. Over that period the house averaged 21.7°C indoors and it averaged 10.4°C outside. January was the heaviest month, at about 1,557 kWh of electricity. The year is not complete: the rest of November and December are still to come, and they are cold months, so the full-year figures will be higher and the efficiency may move.

For comparison, the government-funded Electrification of Heat project measured a median of 2.78 across 428 air source heat pumps in UK homes, counting everything the heating system used. My figure is the app's and may not be measured on the same basis, so the two are not directly comparable. The oil and LPG calculator lets you try your own fuel use at different efficiencies.

The house is on Intelligent Octopus Go, which is a tariff for electric car owners, not a heat pump tariff.

I am not giving a cost in pounds for the heat pump, because I cannot split one out. My Octopus bills cover the whole house and an electric car, all on Intelligent Octopus Go. For what it is worth, whole-house electricity has been roughly £115 to £125 a month in autumn 2026, and that includes charging the car. I will update this page with full-year figures in early 2027.

Warranty and servicing

Glow Green's published heat pump terms give a workmanship guarantee of 5 years from the date the install is completed. That covers faults in the fitting, not faults in the kit, which fall under the manufacturers' own warranties as set out in the quote. Those are the terms on its website in November 2026, so check your own paperwork for yours.

The controls have an extended warranty.

Since October 2026 I have been on Glow Green's Glowcare plan, which costs me £16.95 a month and includes servicing and an extended manufacturer warranty.

What went wrong

The heat pump itself has kept the house warm. The process of getting it fitted is where things went wrong.

The start slipped: I was chasing on the second day, and there were last-minute staffing issues. Two weeks after the booked start the job was still not finished. The thermostats were the wrong ones, finishing work was outstanding, waste was still on site and the old boiler was still there, so on 21 October I raised a formal complaint.

Taking out the old boiler was included in the price, but it was cast iron and the first attempt, around the end of October, failed. Until then it sat in the house, with a smell of oil after it had been partly disconnected. It was finally taken out in mid-November, several weeks after commissioning, and the smell of oil has gone.

The surveyor also did not turn up on the first date booked for the survey.

In February 2026 the outdoor unit leaked water because a clip had broken. A part was ordered, then it went quiet, and a second leak appeared on an internal pipe. An engineer came on 23 February 2026 to replace the leaking fitting, and that fixed it for good.

What I'd do differently, and what I'd tell a friend

I would still have a heat pump. I would not describe the installation as smooth, though, and there are things I would do differently.

  • Get written quotes for the same kit, so you can compare them line by line.
  • Expect the price to change after the survey. Mine went up when the unit had to be 12 kW, not 10 kW.
  • Check what is not in the price, and price the extras separately. My radiators were quoted at £560 each fitted, and the survey and design fee was on top.
  • Ask who will be doing the work and get the start date confirmed. I was chasing on day two.
  • Agree what finished means before work starts: the right controls fitted, the waste taken away and the old boiler gone.
  • Ask how the old boiler will be removed, and when. A cast-iron one is not a quick job.
  • If the job drifts, put it in writing. I raised a formal complaint, and my emails are the reason I can give the dates on this page.
  • Ask how faults are handled after the install, and how quickly. My leak turned up in February, months after the install.

Chris

Compare your quotes before you sign

Put two heat pump quotes side by side. See the like-for-like price after the grant, what one includes that the other leaves out, and the questions worth asking the installer.

Free, runs in your browser, nothing you type is sent or stored. All heating guides