Energy Made Easy
Home heating · Free checker

Does tado work with a heat pump?

Which tado products tado itself says work with UK heat pumps, what to check before you buy, and when a smart thermostat helps a heat pump and when it works against it.

By Last Updated:
On this page· 7 sections
  1. 1The short answer
  2. 2Which tado products can control a heat pump
  3. 3My heat pump: a Vaillant aroTHERM plus
  4. 4Will it save money?
  5. 5What to check before buying
  6. 6The compatibility checker
  7. 7Where to buy

The short answer

  • Yes, with some heat pumps. tado's dedicated heat pump product, the Heat Pump Optimizer X, is compatible with many heat pumps from Daikin, Vaillant, Panasonic, Saunier Duval, Atlantic and Fujitsu. It doesn't cover every model from those brands.
  • For other brands, tado's route is a wired smart thermostat that switches the heat pump on and off. A study published on GOV.UK found that basic on/off thermostats, including smart ones in their default mode, override the heat pump's weather compensation.
  • The main caveat: it depends on your heat pump's controls and wiring, and heat pumps generally run best on weather compensation with long, steady run times. The Energy Saving Trust says it's best to keep a heat pump on all the time and use a lower “set-back” temperature when you're out or asleep.
  • Talk to your installer first. Changing heat pump controls can affect how the system was set up, and manufacturers tie their warranties to the installation.

Last checked: 19 November 2026

Which tado products can control a heat pump

Everything in this section comes from tado's own website, its two help centres and the compatibility guide tado links to. Where tado doesn't say something, we say so rather than guess.

Heat Pump Optimizer X

tado's heat pump product. tado says it can control hydronic heat pumps (the kind that heat water for radiators or underfloor heating) from a named list of brands, connecting through the heat pump's own data connection (“native BUS communication”, in tado's compatibility guide). It works without replacing the control unit, can adjust the heat pump's heat curve, and controls one heating circuit per home.

Wired Smart Thermostat X

Replaces an existing wired room thermostat and works with systems that use Relay (on/off switching) or OpenTherm. tado says you can use it with a boiler or heat pump, and that alongside an Optimizer it sends the actual room temperature to it. On a relay, tado offers a free “Heat pump” control mode meant to reduce unnecessary start-ups and frequent cycling.

Smart Radiator Thermostat X

Fits on individual radiators for room-by-room control. With an Optimizer, these and the thermostats measure room temperature and call for heat. tado notes that rooms without one still receive heat whenever the heat pump runs.

Older V3+ Wired Smart Thermostat

tado's previous range. Its help centre says the wired thermostat can be wired to a boiler, underfloor heating, a zone valve or a heat pump. tado doesn't say anything more specific about heat pumps for this range, and tado X products don't work with V3+ ones.

Which heat pump brands tado lists

BrandListed for the Heat Pump Optimizer X?What the sources say
VaillantYestado's compatibility guide lists Arotherm models with the VRC 700 and VRC 720 controllers (Vaillant's sensoCOMFORT is the VRC 720). tado's checker returned compatible for the aroTHERM plus hydraulic station.tado: Compatibility Guide for the Heat Pump Optimizer X (PDF) · Vaillant: sensoCOMFORT VRC 720f/3 operating and installation instructions (PDF) · tado: heat pump compatibility check
DaikinYestado's compatibility guide marks several Daikin models as not compatible, including the Altherma 3 M, the Altherma Monobloc (EBHQ, EBLQ, EDHQ, EDLQ) and the Altherma R Hybrid. Check your exact model.tado: Compatibility Guide for the Heat Pump Optimizer X (PDF) · tado help centre: Daikin heat pumps and the Heat Pump Optimizer X
PanasonicYestado's compatibility guide marks Panasonic WH-ADC, WH-SDC and WH-SXC units up to generation G as not compatible, and from generation H as compatible.tado: Compatibility Guide for the Heat Pump Optimizer X (PDF) · tado help centre: Panasonic heat pumps and the Heat Pump Optimizer X
Saunier DuvalYesNamed in tado's brand list. Check your exact model in tado's checker.tado: Compatibility Guide for the Heat Pump Optimizer X (PDF)
AtlanticYesNamed in tado's brand list. Check your exact model in tado's checker.tado help centre: Is tado° compatible with my heat pump?
FujitsuYesNamed in tado's brand list. Check your exact model in tado's checker.tado: Compatibility Guide for the Heat Pump Optimizer X (PDF)
Mitsubishi EcodanNo (not listed, 19 November 2026)Mitsubishi's Ecodan controller has a room thermostat input, and Mitsubishi says the thermostat's on/off cycle time must be 10 minutes or more because excessive cycling can shorten the compressor's life.Mitsubishi Electric: Ecodan FTC6 controller data sheet (PDF)
SamsungNo (not listed, 19 November 2026)Samsung's EHS installation manual documents 230 V thermostat inputs, but also warns that using other types of devices with its control system may void the warranty.Samsung UK: EHS Mono R290 support and installation manual
Octopus CosyNo (not listed, 19 November 2026)Octopus says Cosy doesn't rely on traditional wall-mounted controls; its Cosy Pods are room sensors. Octopus doesn't say whether third-party thermostats are supported.Octopus Energy: Introducing Cosy Heat Pumps (PDF)

The brand list comes from tado's help centre and its UK compatibility page. tado's heat pump page also says it's “compatible with all major heat pump brands”, which doesn't match those lists, so go by the lists and the model-by-model checker. If your model isn't listed, tado asks you to send the exact make and model, and your current thermostat, through its help chat.

What tado's pages don't confirm: Mitsubishi Ecodan, Samsung, Viessmann, LG and Octopus Cosy heat pumps aren't in tado's brand lists, and none came up in its checker when we searched. That doesn't prove they can't work with a wired tado thermostat. It means tado doesn't say they do.

My heat pump: a Vaillant aroTHERM plus

I have an air source heat pump, a Vaillant aroTHERM plus run by Vaillant's sensoCOMFORT controller. The whole story of the install is in my heat pump installation. Here's how it lines up with tado's information:

  • Vaillant is on tado's brand list for the Heat Pump Optimizer X.
  • tado's compatibility guide lists Arotherm models “with VRC 700 and VRC 720” as compatible. Vaillant's own manual is titled sensoCOMFORT VRC 720f/3, so the sensoCOMFORT is a VRC 720.
  • In tado's checker, the aroTHERM plus appears under its indoor units. Selecting the hydraulic station (VWZ MEH 97/6, listed as “aroTherm plus VWZ MEH 97/6”) returned “tado° is compatible with your heating system” on 19 November 2026.

The other side: Vaillant's aroTHERM plus handover guide says the system has weather compensation as standard, and asks owners not to change the settings the installer made because they affect how the heat pump runs. So for anyone with the same setup, the first step isn't buying anything. It's asking the installer what an Optimizer would change.

Will a smart thermostat save money with a heat pump?

Sometimes, but not in the way it does with a gas boiler. The most useful evidence is a July 2026 report for the Committee on Fuel Poverty, written by the Carbon Trust and Ipsos UK and published on GOV.UK, which looked at real heat pumps in real homes.

Weather compensation does most of the work

Weather compensation makes the heat pump send cooler water to the radiators on mild days and warmer water on cold ones. The Energy Saving Trust says your installer should set this “heating curve” when the heat pump goes in, that a badly set one can increase running costs, and that heat pumps are more efficient at lower temperatures. The Committee on Fuel Poverty report found that weather compensation set up correctly was the factor most strongly associated with high efficiency.

Why on/off control can work against it

The same report says the compressor runs most efficiently when it runs continuously at a low, steady speed. A basic thermostat does the opposite: it switches the heat pump on and off by room temperature. The report says that overrides the heat pump's own modulating logic, and that this includes “smart” thermostats in their default on/off mode. Its workaround is to set such a thermostat high enough that it effectively stays on, at which point it isn't doing much.

It's not black and white. The report found the evidence inconclusive on whether running a heat pump intermittently always costs efficiency, and that large set-backs and schedules didn't always produce poor results. But people who used large set-backs and expected a quick warm-up when they turned the heating back up tended to be the least comfortable and satisfied, because a heat pump recovers more slowly than a boiler. Mitsubishi goes further for its own kit: its Ecodan data sheet says a room thermostat must cycle no more often than every 10 minutes, or the compressor's life can suffer.

When a smart thermostat can help

  • Away mode. tado's geofencing turns the heating down when everyone has left. It needs tado's AI Assist subscription, from £3.99 a month or £29.99 a year on tado's site when we checked on 19 November 2026. With a heat pump, “down” should mean a modest set-back, not off: the Energy Saving Trust advises keeping it on.
  • Not heating empty rooms, and zoning. Smart Radiator Thermostats X can hold spare rooms cooler. The report found moderate trimming of room temperatures cut heating energy slightly without hurting efficiency. It didn't test more extensive zoning. tado notes that rooms without one of its radiator thermostats still get heat when the heat pump runs.
  • Tariff-aware scheduling. tado's Balance is a subscription that steers the heat pump towards the cheapest times of day, taking account of your electricity tariff, solar panels and the outdoor temperature. It only works with a Heat Pump Optimizer X.

When it probably won't

If your heat pump already runs on well-set weather compensation and the house is comfortable, the Energy Saving Trust's view is that you shouldn't need to change the controls at all. Adding an on/off thermostat on top of that is the case the report warns about. We haven't found independent figures for how much a tado device saves on a heat pump, so this page doesn't quote one.

What to check before buying

  1. Your exact model. Find the make and model of both the outdoor unit and the indoor unit or cylinder, and put them into tado's checker. tado says its results are general and non-binding.
  2. Which controls have to stay. With an Optimizer, tado says your existing heat pump controller stays. With Daikin, tado says it switches off any third-party room thermostat. Ask your installer what their design relies on.
  3. Your warranty. Ask the installer and the manufacturer before changing controls. Vaillant ties its warranty to installation by a qualified engineer following its instructions, and Samsung's manual warns that other devices may void the warranty. We couldn't find an MCS rule on adding a third-party control. The Committee on Fuel Poverty report notes that MCS doesn't prohibit them.
  4. Wiring. The Optimizer connects to the heat pump's data connection, and tado says you may have to open your heat pump to fit it yourself. The Wired Smart Thermostat X needs a heat pump that accepts a Relay or OpenTherm thermostat. tado suggests a professional installer as an alternative to its app's instructions. If fitting means opening the heat pump, get your installer to do it.
  5. Weather compensation first. If you don't know whether it's on, ask your installer to check the heating curve before you add anything.

Will tado work with my heat pump? Quick checker

Four questions. The result says which tado product, if any, applies, and every reason links to its source. It's a starting point for the conversation with your installer, not a guarantee.

The brand is usually on the outdoor unit or the indoor controller.

Is a wired room thermostat connected to it now?

A thermostat on the wall with wires running to the heat pump or its controller, not a battery-powered sensor.

Is weather compensation switched on?

Weather compensation makes the heat pump run cooler water on mild days and hotter water on cold ones. Your installer's handover notes should say.

Do you want different temperatures in different rooms?

Choose your heat pump brand to see the result.

Based on tado's and the manufacturers' published information, checked 19 November 2026. tado says its own compatibility results are general and non-binding. Nothing you choose here is sent or stored.

Where to buy

tado sells its heat pump range direct on its UK site. Check your model in tado's compatibility checker first, and see the current prices on tado's site. We don't list prices here because they change often.

tado° UK shop

Heat Pump Optimizer X, smart thermostats and radiator thermostats.

Opens tado°'s own site. We don't earn anything from this link today. If that changes it will be labelled as an affiliate link here. How we make money

Sources: tado help centre: Is tado° compatible with my heat pump? · tado: Compatibility Guide for the Heat Pump Optimizer X (PDF) · tado: heat pump compatibility check · tado: smart solutions for heat pumps · tado: compatibility · tado: smart thermostats for boilers and heated floors · tado help centre: How does tado° control heating setups with a heat pump? · tado help centre: How does tado° X integrate into my existing heating system? · tado help centre: controlling the Heat Pump Optimizer X from the app · tado help centre: improving your heat pump's heat curve · tado help centre: What is Control Mode? · tado help centre: Daikin heat pumps and the Heat Pump Optimizer X · tado help centre: Panasonic heat pumps and the Heat Pump Optimizer X · tado support (V3+): How does tado° integrate into my existing heating system? · tado: smart thermostats and AI Assist · tado help centre: What is Balance for Heat Pumps? · tado help centre: installation instructions · Committee on Fuel Poverty (GOV.UK): How to ensure a successful transition to heat pumps for households at risk of fuel poverty (July 2026, PDF) · GOV.UK: Committee on Fuel Poverty heat pump transition report · Energy Saving Trust: The most efficient way to run a heat pump · Vaillant: aroTHERM plus handover guide (PDF) · Vaillant: sensoCOMFORT VRC 720f/3 operating and installation instructions (PDF) · Mitsubishi Electric: Ecodan FTC6 controller data sheet (PDF) · Samsung UK: EHS Mono R290 support and installation manual · Octopus Energy: Introducing Cosy Heat Pumps (PDF). Figures last checked 19 November 2026.

Got questions?

tado and Heat Pump FAQ

tado doesn't list Octopus Cosy for its Heat Pump Optimizer X, and Cosy didn't come up in tado's compatibility checker when we looked on 19 November 2026. Octopus says Cosy doesn't rely on traditional wall-mounted controls and that its Cosy Pods are room sensors, and it doesn't say whether third-party thermostats are supported. Ask Octopus or your installer before buying anything.

Compare your quotes before you sign

Put two heat pump quotes side by side. See the like-for-like price after the grant, what one includes that the other leaves out, and the questions worth asking the installer.

Free, runs in your browser, nothing you type is sent or stored. All heating guides